Thursday, December 23, 2010

Building Innovation: In the early 1920's copper tubing replaces lead/steel pipes in the home.

Monday, December 20, 2010

Houses built today are much better insulated and more draft free than thoses built in prior days. This is a good thing; but it can cause some minor problems to the homeowner.

There is more moisture in these better sealed homes which will accumulated on the interion of window panes. This moisture can be traped between the glass and curtins/drapes/binds/shades. When this happens mold/mildew will sometimes form on the window sash/frame. This is especially noticed on the north side of the house.

This can easily be advoided by creating air circulation between the glass and the window treatment - don't close the drapes all the way and leave a small gap between the shades and the sills.

Friday, December 17, 2010

Building Innovation: In 1916 paper faced gypsum wall board is introduced and begins to replace plaster/lathe. However, it doesn't take off until after the building boom following WW II.

Tuesday, December 14, 2010

Winter tip: Ice and salt don’t mix. Actually it’s concrete and salt don’t mix. If you are using salt or other ice melting products on your concrete walks, don’t! Contrary to stated clams, there are no products that will safely melt ice from concrete without damaging the surface. So what can done? One good way to create traction on iced concrete walkways or other iced surfaces , is to spread a coating of cat litter on the iced surface.

Friday, December 10, 2010

Building Product Innovation: 1914 The electric refrigerator makes its debut.

Wednesday, December 8, 2010

Continue to believe in the American Dream of home ownership!

Monday, December 6, 2010

Winterization Tip:
Reminder: Even if you have a frost free faucet outdoors, you must detach your hoses for the faucet to drain properly and thus prevent freezing of the pipe.
Quick Delivery Home Available.

83 Journey Lane, Glenmont, NY
4 Bedroom,2.5 Bathrooms
2,730 Sq. Ft

Monday, November 22, 2010

Swift Builders

It all started from the family run ship building business in the old country. Hearing that there were many opportunities in American, he decided to leave his homeland and use the skills he had acquired over the years to start a new venture in the building of homes. In early Spring of 1834, William Swift, Master Carpenter, arrived in the town of New Scotland from York, England with his crate of saws, planes, chisels, and other hand tools. http://swiftbuilders.com